Manitowoc QF0800 Spezifikationen PDF herunterladen (Seite 237)

100

101

Part Number 80-1230-9 6/08 237

EVAPORATOR DISASSEMBLY

1. Remove spline hub and key stock. Sand shaft

smooth where setscrew contacted shaft.

2. Remove evaporator top cap and grease from top

of evaporator.

3. Remove top snap ring (big clip). (QF2300 Only -

also remove spring shim.)

4. Drive auger shaft out through top of evaporator by

placing wooden 2 x 4 on floor and tap auger shaft

on 2 x 4.

5. Remove run-out collar (remove from bottom or

run-out collar will be on the auger).

6. Remove bottom shaft seal.

7. Remove lower bearing snap ring. (QF2300 Only -

also remove bearing shim.)

8. Drive out bottom bearing (QF2300 Only - also

drive out second bearing shim) with bearing

removal tool (top to bottom).

9. Remove water seal snap ring.

10. Remove water seal (top to bottom).

11. Remove snap ring from top of auger.

12. Remove top bearing with a bearing puller.

13. Remove top seal.

SPLINE HUB AND KEY STOCK

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 307 308

Kommentare zu diesen Handbüchern

Keine Kommentare

Manitowoc QF0800 Spezifikationen Seite 237

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eiswürfelmacher Manitowoc QF0800