Manitowoc MII 150 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 26)

Installation and Service Manual

OPERATION

115V/220V NON ADJUSTABLE AGITATION TIMER

The agitation timer on this unit is equipped with test pins. This allows you to test the timer by removing the jumper

between the two pins. When the jumper is removed the timer will cycle every 55 seconds if it is operating correctly. If the

timer is wired correctly and does not cycle approximately every 55 seconds when the jumper is removed, replacement

of the timer may be necessary. Make sure to replace the jumper pins when finished.

NOTES: This timer is re-settable, timed agitation every 3.5 hours from last dispense on power supply broken. Never

operate in normal mode without test pins in place, damage could occur.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Keine Kommentare

Manitowoc MII 150 Anleitung zur Fehlerbehebung Seite 26